Fits Fox/Bilstein 2.0 hydraulic bumps! These housings are to be tied into your rig’s cage or any other 1.75” OD tube mounting surface.
There is 5.35 inches of adjustment in ~1” increments. Grade 8 bolts, nuts, and lock washers included!
Constructed from DOM and 1/4”, and 3/16” steel plate.
Please choose between fully welded, or not (just the can pinch bolt sleeves welded).
Note: This is for a PAIR of bump stop housings.
Bump stops not included.
Watch our video here of how to assemble them if you choose DIY weld!
Fits Fox/Bilstein 2.0 hydraulic bumps! These housings are to be tied into your rig’s cage or any other 1.75” OD tube mounting surface.
There is 5.35 inches of adjustment in ~1” increments. Grade 8 bolts, nuts, and lock washers included!
Constructed from DOM and 1/4”, and 3/16” steel plate.
Please choose between fully welded, or not (just the can pinch bolt sleeves welded).
Note: This is for a PAIR of bump stop housings.
Bump stops not included.
Watch our video here of how to assemble them if you choose DIY weld!
