Jeep WJ Rear Adjustable Bumpstop Kit
Now this whole custom setup is available for your WJ! This setup is ideal if your rig does not have room for out-boarded bumpstops (outside the frame). A gas tank relocation and spare tire area delete is required for fitment. This setup was tested with a rear stretch so please look at photos to double check compatibility with your WJ. The DOM tube could be placed anywhere in the plated area before being welded in so there is a lot of room to work on placement.
Included is:
Driver and passenger rear inside frame rail 1/8” steel plating
Pair of 4Link4WD tube-mounted adjustable bump stop mounts
3/16” steel plate center brace
36” of 1.75” 0.120” wall DOM tubing.
Fits Fox/Bilstein 2.0 hydraulic bumps or King 2.0 bump stop mounts!
There is 5.35 inches of adjustment in ~1” increments. Grade 8 bolts, nuts, and lock washers included!
Please choose if you want bump cans that fit Fox or King 2.0 bumps.
Note: DOM tubing is cut long to ensure you have enough to work for your rig. Only the bump stop brackets come welded. Frame plates, DOM and bump brackets need to be welded to the vehicle. Bump stops not included.
Now this whole custom setup is available for your WJ! This setup is ideal if your rig does not have room for out-boarded bumpstops (outside the frame). A gas tank relocation and spare tire area delete is required for fitment. This setup was tested with a rear stretch so please look at photos to double check compatibility with your WJ. The DOM tube could be placed anywhere in the plated area before being welded in so there is a lot of room to work on placement.
Included is:
Driver and passenger rear inside frame rail 1/8” steel plating
Pair of 4Link4WD tube-mounted adjustable bump stop mounts
3/16” steel plate center brace
36” of 1.75” 0.120” wall DOM tubing.
Fits Fox/Bilstein 2.0 hydraulic bumps or King 2.0 bump stop mounts!
There is 5.35 inches of adjustment in ~1” increments. Grade 8 bolts, nuts, and lock washers included!
Please choose if you want bump cans that fit Fox or King 2.0 bumps.
Note: DOM tubing is cut long to ensure you have enough to work for your rig. Only the bump stop brackets come welded. Frame plates, DOM and bump brackets need to be welded to the vehicle. Bump stops not included.
Now this whole custom setup is available for your WJ! This setup is ideal if your rig does not have room for out-boarded bumpstops (outside the frame). A gas tank relocation and spare tire area delete is required for fitment. This setup was tested with a rear stretch so please look at photos to double check compatibility with your WJ. The DOM tube could be placed anywhere in the plated area before being welded in so there is a lot of room to work on placement.
Included is:
Driver and passenger rear inside frame rail 1/8” steel plating
Pair of 4Link4WD tube-mounted adjustable bump stop mounts
3/16” steel plate center brace
36” of 1.75” 0.120” wall DOM tubing.
Fits Fox/Bilstein 2.0 hydraulic bumps or King 2.0 bump stop mounts!
There is 5.35 inches of adjustment in ~1” increments. Grade 8 bolts, nuts, and lock washers included!
Please choose if you want bump cans that fit Fox or King 2.0 bumps.
Note: DOM tubing is cut long to ensure you have enough to work for your rig. Only the bump stop brackets come welded. Frame plates, DOM and bump brackets need to be welded to the vehicle. Bump stops not included.