XL Universal Pinion Flange Holder
It’s time that you can save your pipe wrench for plumbing, not gear work. With our beefy universal pinion holder, you’ll never have a problem torquing down crush sleeves (or non-crush sleeve applications) again.
Guaranteed to never bend or break like some of the others on the market. Fully TIG welded and made of solid steel. The end of this holder is made to fit inside your floor jack removable handle, or into any other cheater bar / pipe. Center hole is 3.1” in diameter.
Best for large medium and heavy duty trucks. Made to fit the new generation Chevy 2500/3500 trucks but will fit many more that use large flanges.
If you’re wondering if this will fit your application, measure from center to center -diagonally- of the mounting holes on the flange. The smallest diagonal hole measurement this will accept is 4.6”, and the largest diagonal hole measurement is 7.9”. The slots are 0.52” wide so will fit just over a 1/2” threaded bolt. Please measure first to make sure! Contact us if you need help with this.
Note: Be sure to use the proper hardware, and that the yoke/flange bolts have plenty of thread engagement. Factory driveshaft to flange mounting bolts should work well with some washers.
It’s time that you can save your pipe wrench for plumbing, not gear work. With our beefy universal pinion holder, you’ll never have a problem torquing down crush sleeves (or non-crush sleeve applications) again.
Guaranteed to never bend or break like some of the others on the market. Fully TIG welded and made of solid steel. The end of this holder is made to fit inside your floor jack removable handle, or into any other cheater bar / pipe. Center hole is 3.1” in diameter.
Best for large medium and heavy duty trucks. Made to fit the new generation Chevy 2500/3500 trucks but will fit many more that use large flanges.
If you’re wondering if this will fit your application, measure from center to center -diagonally- of the mounting holes on the flange. The smallest diagonal hole measurement this will accept is 4.6”, and the largest diagonal hole measurement is 7.9”. The slots are 0.52” wide so will fit just over a 1/2” threaded bolt. Please measure first to make sure! Contact us if you need help with this.
Note: Be sure to use the proper hardware, and that the yoke/flange bolts have plenty of thread engagement. Factory driveshaft to flange mounting bolts should work well with some washers.
It’s time that you can save your pipe wrench for plumbing, not gear work. With our beefy universal pinion holder, you’ll never have a problem torquing down crush sleeves (or non-crush sleeve applications) again.
Guaranteed to never bend or break like some of the others on the market. Fully TIG welded and made of solid steel. The end of this holder is made to fit inside your floor jack removable handle, or into any other cheater bar / pipe. Center hole is 3.1” in diameter.
Best for large medium and heavy duty trucks. Made to fit the new generation Chevy 2500/3500 trucks but will fit many more that use large flanges.
If you’re wondering if this will fit your application, measure from center to center -diagonally- of the mounting holes on the flange. The smallest diagonal hole measurement this will accept is 4.6”, and the largest diagonal hole measurement is 7.9”. The slots are 0.52” wide so will fit just over a 1/2” threaded bolt. Please measure first to make sure! Contact us if you need help with this.
Note: Be sure to use the proper hardware, and that the yoke/flange bolts have plenty of thread engagement. Factory driveshaft to flange mounting bolts should work well with some washers.
See the video and blog post about us pushing this tool to the limits!
Click here to read about our pinion tool giveaway! January 2024
Click here to read about how we are now a dealer for Revolution Gear & Axle!